M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
7
CHAPTER 3
MACHINE INSTALLATION
3.1. INTRODUCTION:
This chapter explains how to install the machine correctly.
WARNING: The operations described in this chapter should be
performed by qualified personnel, following safety instructions.
3.2. POWER SUPPLY CONNECTION:
The CP-40 model has a power supply of 24 VDC.
3.3. CONNECTING THE SOLENOID VALVES:
The CP-40 model allows for the possibility of connecting four solenoid
valves with a pluggable connector per output.
The solenoid valves are connected to the CP-40 using pluggable
connectors. Each output (solenoid valve) supports up to 25.5W.
3.4. CONNECTING THE PHOTOCELL:
The CP-40 model has two input from the optoisolated PNP type shot
photocell or sensor with a power supply of 24 VDC.
The photocell is connected to the CP-40 using pluggable connectors.
3.5. CONNECTING THE EXTERNAL PERMISSION:
The CP-40 model has an external permission input
The gluing equipment sends a permission signal to the CP-40 as soon as
the programmed temperature has been reached.
The CP-40 sends a permission signal to the gluing equipment as soon as
the CP-40 is ON.
3.6. CONNECTING THE ENCODER:
The CP-40 model has an input from en encoder with a ratio with the
movement of the line of 500mm/turn.
