M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
14
Stitch pattern configuration:
* Configuration *
-- Mould at dots
Press
to enter the menu or
Esc
to exit.
When entered, the display shows:
* mould to dots *
total cycle: xx ms
Where XX is the total cycle time for the dashed line. This means the time
between the beginning of two consecutive dots. Press
to validate the
changes. Use key
for moving among the parameters.
* mould to dots *
on dot: xx ms
Where XX is the time length of the dot of the stitch pattern.
Photocells filter:
* Configuration *
-- FTCs Filter
Press
to enter the menu or
Esc
to exit.
* FTCs filter *
T. Filter: xx ms
This menu is used for the selection of the photocell used as start signal
for every channel.
Where XX,X is the time in milliseconds that the photocell needs to give
the start signal to that channel.
Photocells allocation:
* Configuration *
-- Allocate PTCs
Press
to enter the menu or
Esc
to exit.
This menu is used for the selection of the photocell
used as start signal for every channel.
The display will show:
