M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
17
CHAPTER 5
MAINTENANCE
WARNING: The maintenance operations described in this chapter should
only be performed by qualified personnel understanding the processes
and familiar with the safety measures involved.
5.1. INTRODUCTION:
This chapter contains the procedures required for proper maintenance of
the CP-40. Following these procedures will ensure safe operation and
longer machine life. Before starting a maintenance operation, carefully
read chapter 1, Safety.
1 Disconnect the equipment from mains.
2 Check that it is not energised.
3
Carry out maintenance tasks following applicable safety
regulations.
5.2. MAINTENANCE RECOMMENDATIONS:
The following table shows the frequency with which maintenance
operations should be performed:
Frequency
Maintenance
Clean the outer surfaces of the CP-40.
Clean the control panel periodically using a soft cloth
Inspect all electric connections.
Daily
Test valves.
Do not let the panel come into contact with any solvents that may
corrode the controls
