M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
8
CHAPTER 4
MACHINE ADJUSTMENTS
4.1. INTRODUCTION:
The following adjustments should be made before the machine is
switched on or while it is operating. They will ensure that the machine
works properly and safely.
4.2. SHOT CONTROL:
4.2.1. Introduction:
Pattern diagram for each channel:
Note:
The values of the spaces (L1 – L7) should always be longer
than the end of the previous bead i.e.: L5 should be longer
than L3 + L4..
In case of a wrong programming the control will add the
following line to the previous one.
i.e.: If L5 is programmed shorter than L3 + L4 the control will
take automatically a value of L3 + L4 obtaining a space of L3
and a bead of L4 + L5.
When 0 is assigned to a value, this remains deactivated
T1
T2
T3
T4
T5
T6
T7
T8
