8
9
EN
EN
Using the appliance
Using the appliance
B
B
Before locating the fixing brackets
• The unit should be placed on a stable, smooth surface (use the packaging). Do not apply
force onto the controls protruding from the hob.
Adjusting the bracket position
• Fix the hob on the work surface by screw 4 brackets on the bottom of hob(see picture) after
installation. Adjust the bracket position to suit for different table top thickness.
Bracket
Bracket
Bracket
WARNING:
Under any circumstances, the brackets cannot touch with
the inner surfaces of the worktop after installation (see
picture).
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine
or clothes dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
Connecting the hob to the mains power supply
WARNING:
This hob must be connected to the mains power supply
only by a suitably qualified persol
Before connecting the hob to the mains power supply, check
that:
1. The domestic wiring system is suitable for the power
drawn by the hob.
2. The voltage corresponds to the value given in the rating
plate
3. The power supply cable sections can withstand the load
specified on the rating plate.
To connect the hob to the mains power supply, do not use
adapters, reducers, or branching devices, as they can cause
overheating and fire.
The power supply cable must not touch any hot parts and
must be positioned so that its temperature will not exceed
75˚C at any point.
