32
33
EN
EN
Useful information
Useful information
C
C
Failure code
Problem
Solution
U1
Communication error.
Reinsert the connection
between the display board
and the power board.
Replace the power board or
the display board.
2) Specific Failure & Solution
Failure
Problem
Solution A
Solution B
The LED does not
come on when unit
is plugged in.
No power supplied.
Check to see if plug
is secured tightly
in outlet and that
outlet is working.
The accessorial
power board and
the display board
connected failure.
Check the
connection.
The accessorial
power board is
damaged.
Replace the
accessorial power
board.
The display board is
damaged.
Replace the display
board.
Some buttons
can’t work, or the
LED display is not
normal.
The display board is
damaged.
Replace the display
board.
The Cooking Mode
Indicator comes on,
but heating does not
start.
High temperature of
the hob.
Ambient
temperature may be
too high. Air Intake
or Air Vent may be
blocked.
There is something
wrong with the fan.
Check whether the
fan runs smoothly; if
not , replace the fan.
The power board is
damaged.
Replace the power
board.
Failure
Problem
Solution A
Solution B
Heating stops
suddenly
during operation
and the display
flashes “u”.
• Pan Type is wrong. Use the proper
pot (refer to the
instruction manual.)
Pan detection circuit
is damaged, replace
the power board.
• Pot diameter is too
small.
Cooker has
overheated;
Unit is overheated.
Wait for temperature
to return to normal.
Push “ON/OFF”
button to restart
unit.
Heating zones of the
same side ( Such
as the first and the
second zone ) would
display “u” .
The power board
and the display
board connected
failure;
Check the
connection.
The display board of
communicate part is
damaged.
Replace the display
board.
The Main board is
damaged.
Replace the power
board.
Fan motor sounds
abnormal.
The fan motor is
damaged.
Replace the fan.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.