0020193968_05 ecoTEC exclusive Installation and maintenance instructions
17
2.
Note the total weight of the product.
3.
Only use fixing material that is permitted for the wall.
4.
If required, ensure that mounting apparatus on-site has
sufficient load-bearing capacity.
5.
Wall-mount the product as shown in the illustration.
6.9
Removing/installing the front casing
6.9.1
Removing the front casing
B
A
B
▶
Remove the front casing as shown in the illustration.
6.9.2
Installing the front casing
▶
Refit the components in the reverse order.
6.10
Removing/installing the side section
6.10.1 Removing the side section
A
C
D
2x
B
Caution.
Risk of material damage caused by mech-
anical deformation.
Removing
both
side sections may cause
mechanical distortion in the product, which
may cause damage to the piping, for ex-
ample, and potentially result in leaks.
▶
Depressurise the product on the water
side.
▶
Always remove
only one
side section
–
never both side sections at the same time.
▶
Remove the side section as shown in the illustration.
6.10.2 Installing the side section
▶
Refit the components in the reverse order.
