White symbol
= manual bout marker switching.
Applies only to Tempo F
The bout markers are
always folded in when the machine is lifted,
regardless of the indication on the home screen.
This is also the case if the terminal is switched
off.
These are the possible choices:
•
both bout markers retracted
•
right bout marker extended
•
left bout marker extended
•
both bout markers extended
Advance bout marking with
.
12.8
Front hopper activation
Press on the field in the work display to select function.
The bout markers are always folded in when the
machine is lifted, regardless of the indication on
the home screen. This is also the case if the
terminal is switched off.
NOTE:
Applies only to Tempo F
When the front hopper (FH) is used for feeding
out fertiliser, switching OFF/ON can be done in
two different ways:
•
Hydraulic switch-on linked to one of the
tractor’s hydraulic valves.
•
Select the symbol for front hopper (FH) on
the homepage.
Only one of the two alternatives need be used.
For both options, the method that is not used
should always be on. This means that if the
symbol is enabled on the iPad, the hydraulic
switch-on will always be active. In the same
way, if the hydraulic switch-on is used, the
symbol will always be activated.
12.9
The tramlining program
It is possible to manually select the bouts in the tramline
program. It may be necessary to do so, such as in cases
where there are irregular fields, for example.
For more information on tramlining, see
Figure 12.1
1. Press the display field for bouts (A) at the top right of
the home screen. A pop-up window will appear.
2. Use the plus or minus keys (C) to scroll through the
tramline program.
3. Confirm your selection with (B).
12.10 Variable adjustable feed rate
12.10.1 E-Control
The feed rate is adjusted through a pop-up window
directly on the home screen where it is possible to select
a percentage change (the example in the screenshot
shows the setting for the amount of seed delivered).
Figure 12.2
Open the pop-up window by pressing on the field for the
feed rate. Adjust the control to the desired change. 0%
means no change. The percentage change is recorded in
the calibration menu.
38
903075-en-gb; 07.06.2017
