RoboSHOT 12 USB
RoboSHOT 12 USB - Document Number 342-0981 Rev B
Page 7 of 40
Image: RoboSHOT 12 USB Rear Panel Connections.
1) Power Connector:
12 VDC, 3.0 Amp power input on an EIAJ-04 connector with a positive center.
2) Network PoE+ RJ-45:
The PoE+ Gb Ethernet port allows the camera to be powered from a PoE+ network
switch or power injector, controlled from embedded web server with a web browser or through a Telnet session. It
also will IP Video in a RTSP format with H.264 compression up to 1080p/30. Note: for RoboSHOT 12 USB Release
1.0.0, 1080p is the only active IP (H.264) streaming resolution available. More resolutions will be added in the next
software releases.
3)
USB 3.0 Port:
This port will stream uncompressed UVC (USB Video Class) standard video up to 1080p. The
camera will detect the connection to a USB 2.0 video port and provide standard resolution video to the host PC
that USB 2.0 can handle (640x480, 360p/30, 240p/30, 320x240 and 180p). Many UC clients will not ask for more
than standard resolutions such as these.
4) HDMI VIDEO SELECT:
A rotary switch allows the user to choose the HDMI video output resolution. See the
Switch Settings page for additional information.
5) Camera Setting DIP Switch:
DIP switch settings for IR remote frequency, baud rate and image flip can be
configured on these switches. See the Switch Settings page for additional information.
6) HDMI Video Output:
This is the HDMI video output (what else can you say?).
7) RS-232 Port (Color Coded Blue):
The RS-232 port accepts modified VISCA protocol for camera control over
a Cat-5/5e/6 cable.
②
③
④
⑤
⑥
①
⑦
