RoboSHOT 12 USB
RoboSHOT 12 USB - Document Number 342-0981 Rev B
Page 19 of 40
Screen Shot: Admin Menu - USB 3.0 and IP Streaming Video Page
1) USB Streaming Mode
: Streaming can be set for either USB 3.0 streaming (uncompressed) and IP streaming (RTSP format
with H.264compression. The RoboSHOT can simultaneously stream USB and IP video, Telnet or IP control of the webserver
control. Enable the USB 3.0 UVC streaming here
2) USB Device Name:
Allows the user to use a “friendly name” per system. The user has the ability to move between different
UC conference rooms and have the ability to assign the PC’s USB resources to that room.
3) IP
Steaming
Enable
: This check box enables the IP (H.264) streaming in a RTSP format. Unchecking the box,
discontinues streaming.
4) IP Streaming Settings:
The Video Settings allow the selection of the target performance for the IP Streaming. There are
two Modes for the User:
a.
Easy Mode:
In Easy Mode, the user selects the resolution and picks between three preset quality levels, which
includes High Quality (best), Standard Quality (better) and Low Bandwidth (good).
b.
Custom Mode:
In Custom Mode, the user can select the resolution, the target frame rate and the Quality
(Quantization) of the stream on a slider. Setting the Custom Mode inappropriately may yield less than desirable
results.
5) Streaming Protocol and URL
: The IP Streaming format is RTSP with a default port of 554, which can be changed. The
admin sets the name of the path to the streaming server (friendly name) and the Streaming URL auto populates. Use this
URL and enter it on the Streaming Line in the media player to view the IP stream.
6) New Feature - USB Monitor:
When the system is streaming USB video, a monitor on the top bar will indicate the USB
Streaming resolution and Frame rate that has been selected by the application and the host PC.
When finished setting up the streaming parameters click Save to put the changes into effect or cancel, which will not save
the configuration.
➊
➍
➌
➋
➎
➏
NEW FEATURE
