camera ptz-position
Specifies a shot by zoom and pan/tilt coordinates. The amount of pan and tilt available depend on the
zoom level. (See
How It Works: Digital Pan/Tilt/Zoom
.) Pan, tilt, and zoom may be specified in any order.
Auto-framing pauses when the camera receives this command.
Synopsis
camera ptz-position pan <position> tilt <position> zoom <position> [<speed>] [no_wait]
Options
pan
<position>
The pixel column to center the shot on. Range
may vary by model.
tilt
<position>
The pixel row to center the shot on. Range
may vary by model.
zoom
<position>
<position> is a floating-point value; range
varies by model.
<speed>
Optional; speed of movements (integer) if the
camera should not snap to the specified
position.
no_wait
Optional; when speed is specified, allows the
command to return the command prompt
immediately, while the command is in
progress.
Examples
>
camera ptz-position pan -150 tilt 200 zoom 3
OK
>
Centers the shot at pixel column -150, row 200, at a zoom level of 3. The camera snaps
to the shot, because no speed is specified. At this zoom level, the shot can be centered
exactly as requested.
>
camera ptz-position pan -1470 tilt 200 zoom 2 speed 5 no_wait
OK
>
Attempts to center the shot at pixel column -1470, row 200, at a zoom level of 2. The
camera moves at speed 5 and returns the command prompt before the motion is
finished. The shot cannot be centered exactly as requested, because it is relatively wide
and the requested center is close to the leftmost column of pixels.
51
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
