Maintenance and Troubleshooting Commands
The following commands are available for maintenance and troubleshooting:
n
version
n
network ping
n
system reboot
n
system factory-reset
network settings get
Returns the camera's current network settings and MAC address. The default hostname includes the
model name of the camera; in the example here, the hostname has been changed.
Synopsis
network settings get
Example
network settings get
Name
eth0:WAN
MAC Address
00:1E:C0:F6:CA:7B
IP Address
10.30.240.67
Netmask
255.255.255.0
VLAN
Disabled
Gateway
10.30.240.1
Hostname
eptz-manchaca
OK
>
version
Returns the current firmware version. "System version" may show a product family name or more than
one product name, as multiple products sometimes use the same firmware. The example is from an
IntelliSHOT camera.
Synopsis
version
Example
>
version
Audio 0
1.03
Audio 1 CFG
1.00
Audio 1 FW
P1.0.1
Commit
966a78e827a2e6f871011eb820706dcaa64ec0e2
Sensor Version 01.03
System Version IntelliSHOT 1.0.0
OK
>
57
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
