Edge Equipment Enclosures
. Edge Equipment Enclosures - Document Number 342-0026 Rev. A
Page 4 of 12
UNPACKING: Bill of Materials (continued)
EE- 9RU:
9-Space Rack Mount Equipment Enclosure (PN: 798-0900-000) Assembled
EE- 9RU:
9-Space Rack Mount Equipment Enclosure (PN: 798-0900-001) Flat Packed
Quantity Part Description
1
Top, powder coated graphite grey nebula
1
Bottom, powder coated graphite grey nebula
2
Sides, powder coated light grey (16.5” Tall)
1
Back, ½” black melamine with vent panel opening
1
Vent Panel, ¼” black melamine
2
Smoke tinted acrylic doors
1pr
Rack Rails (attached to spacer block)
2pr
Door Hinges (in plastic bag)
1
Magnetic Door Catch (dual cylinder - magnetic to door handles)
12
Cams (Phillips head - twist to lock)
12
Connecting Posts (for Cams to connect)
4
1-¼” Dry Wall Screws
4
10-32 x ¾” Pan Head Machine Screws
2
Vent Panel Twist Clips
2
Door Handles (in plastic bag with foam rubber pads)
Flat Packed Rack Assembly Instructions
1) Preparing the Top for Assembly:
a.
Lay the top on a flat clean surface with the beveled edge as shown below.
b. Screw six (6) connecting posts into the proper holes as marked with a Phillips screw driver.
Bushing Holes
Post Holes
Post Holes
