Edge Equipment Enclosures
. Edge Equipment Enclosures - Document Number 342-0026 Rev. A
Page 9 of 12
7) Installing the Doors:
a. Facing the enclosure, place a hinge in the black plastic bushing as shown below.
b. Insert a hinge in the top bushing and hold it here while the door is slid into place as shown.
c. Slide the door to the back edge of the hinge and tighten the rear screw on the top and bottom
hinge. Repeat this procedure for the other door.
d. While holding the door, loosen the screws on the hinge to adjust the doors to get an even gap
in the middle (approx. 1/8”). When the doors are aligned, tighten all the screws on the
hinges.
Hinge in
Bushing
Slide Door
into Hinges
