Edge Equipment Enclosures
. Edge Equipment Enclosures - Document Number 342-0026 Rev. A
Page 5 of 12
c. Insert two (2) black bushings from the hinge package into the proper holes at the front of the
top as shown.
d. Use the two predrilled holes at the front center to locate the magnetic catch. Fasten the
magnetic catch with two long Phillips screws from the package to the top as shown in the
picture below.
e. After six (6) connecting posts, two (2) bushings and the magnetic catch are attached; the top
should look like the picture below.
2) Preparing the Bottom for Assembly:
Lay the bottom on a flat clean surface with the beveled edge
as shown in the picture below. Repeat steps b, c and d from the section above. The six (6)
connecting posts, two (2) bushings are attached; the bottom should look like the picture below.
Black Bushing
