VADDIO AV Bridge MatrixMIX Integrator'S Complete Manual Download

Page: 60 / 82

video source

Gets or sets the source for the specified video output.

Synopsis

video <output channel> source {get | set} <source channel>

Output channels

program

The program output, or the bus A output in dual-
bus mode. Source may be any of the HDMI
inputs (input1..input8).

preview

The preview output, or the bus B output in dual-
bus mode. Source may be any of the HDMI
inputs (input1..input8).

usb_stream

The video portion of the outbound USB stream.
Source may be program (bus A), preview (bus
B), or multiviewer.

ip_stream

The video portion of the outbound IP stream.
Source may be program (bus A), preview (bus
B), or multiviewer.

Options

get

Returns the current source for the specified
output.

set

Sets the source for the specified output.

Source channels

input1

input8

Video from HDMI inputs (Input 1 – Input 8). Valid
sources for

program

and

preview

outputs.

program

The program output, or bus A in dual-bus mode.
Valid source for

usb_stream

and

ip_stream

outputs.

preview

The preview output, or bus B in dual-bus mode.
Valid source for

usb_stream

and

ip_stream

outputs.

multiviewer

The multiviewer output. Valid source for

usb_

stream

and

ip_stream

outputs.

Examples

video program source get

Returns the video source in a form something like this:

source: input3

The camera at Input 3 is the current source for the program output.

video usb_stream source set program

Sets the outbound video portion of the USB stream to use the program
output as its source.

Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher

Summary of Contents for AV Bridge MatrixMIX



















































































Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands

VADDIO AV Bridge MatrixMIX, Integrator'S Complete Manual

Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands