camera ccu scene
Stores the current CCU scene to the specified camera, or recalls the specified ccu scene for the specified
camera.
Synopsis
camera <1..8> ccu scene {recall {factory <1..6> | custom <1..3>} | store custom
<1..3>}
Options
recall factory
<1..6>
recall custom
<1..3>
Recalls the camera to the specified scene (factory 1
– 6 or custom 1 – 3) .
store custom
<1..3>
Saves the current scene as the specified custom
scene.
Examples
>
camera 2 ccu scene recall factory 2
OK
>
Sets camera 2 to use factory CCU scene 2.
>
camera 2 ccu scene store custom 1
OK
>
Saves the current CCU scene to camera 2 as its custom CCU scene 1.
camera standby
Set or change standby status for the specified camera.
Synopsis
camera <1..8> standby { off | on | toggle | get}
Required
<1..8>
Specify the camera to place in standby (low-power)
mode.
Options
off
Brings the camera out of standby mode.
on
Stops video and puts the camera in standby mode.
toggle
Changes the camera's standby state – if it was not in
standby mode, it enters standby; if it was in standby
mode, it "wakes up."
get
Returns the camera's current standby state.
Examples
camera 3 standby off
Brings camera 3 out of standby mode.
camera 2 standby on
Puts camera 2 in standby mode.
camera 2 standby get
Returns the standby status of camera 2 in a form like this:
standby:
off
OK
>
54
Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher
