Operating the Switcher
The AV Bridge MatrixMIX web interface provides an operator interface for basic functions; however, to take
advantage of the full range of the switcher's capabilities, we recommend using it with the TeleTouch 27
USB multiviewer and PCC MatrixMIX live production controller. This chapter covers the AV Bridge
MatrixMIX operator's interface only.
To access the operator's pages of the web interface, you may need to log in with the User account
credentials, depending on how the switcher is configured. The admin login is not required.
Before You Start
If you are not using a TeleTouch 27 USB multiviewer with the switcher, you will need additional information
and software to control the connected cameras, other video sources, and audio equipment.
n
You will need to view the switcher's multiview output. If you are not using a TeleTouch 27 USB
multiviewer (for example, if operating the switcher remotely), you will need to view the multiviewer
output as an IP stream.
n
To view the IP stream, the switcher must be configured to enable IP streaming.
n
To view the IP stream, you will need a stream viewer application such as VLC Media Player.
n
You will need to know the streaming URL for the switcher's IP stream. This information is available on
the Streaming page; the admin login is required.
n
When viewing the multiviewer stream, keep in mind that the stream will lag perceptibly – there is
network-dependent latency in addition to 400 ms of inherent latency.
37
Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher
