VADDIO AV Bridge MatrixMIX Integrator'S Complete Manual Download

Page: 49 / 82

audio volume

Gets or sets the volume of the specified audio channel. The valid range depends on the channel.

Synopsis

audio [ channel ] volume { get | up | down | set <level> }

Channels

master

Get or set the volume for the channel currently
designated as master/AEC reference.

line_in_1

line_in_2

Get or set the volume for the specified Line In.

line_out_1

line_out_2

Get or set the volume for the specified Line Out.

usb3_record_left

usb3_record_right

Get or set the volume for the USB3 Record
Left/Right output channel.

hdmi_in_<1..8>_left

hdmi_in_<1..8>_right

Get or set the volume for the left/right channel of
the specified HDMI input.

usb3_playback_left

usb3_playback_right

Get or set the volume for the USB3 Playback
Left/Right input channel.

ip_out_left

ip_out_right

Get or set the volume for the left/right channel of
the IP stream's audio.

program_out_left

program_out_right

Get or set the volume for the left/right program
output.

preview_out_left

preview_out_right

Get or set the volume for the left/right preview
output.

multiviewer_out_left

multiviewer_out_right

Get or set the volume for the left/right multiviewer
output.

Options

get

Returns the current volume of the specified
channel.

Increases the volume of the specified channel by 1
dB.

down

Reduces the volume of the specified channel by 1
dB.

set <level>

Sets the volume of the specified channel in dB.
Valid ranges:
Line in, line out, master/AEC reference: -50.0 to
20.0 dB
USB, IP, and HDMI: -42.0 to 6.0 dB

Examples

audio line_in_1 volume up

Increases the volume for Line In 1 by 1 dB.

audio line_out_1 volume get

volume -10.0 dB

Returns the current volume for the speaker connected to the line out port.

Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher

Summary of Contents for AV Bridge MatrixMIX



















































































Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands

VADDIO AV Bridge MatrixMIX, Integrator'S Complete Manual

Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands