vacuubrand PC 510 select, Instructions For Use Manual

Page: 21 / 92

21 20901101_EN_PC5xx-6xx_select_Serie_V1.3_260819
Safety information
Risk of burns due to hot surfaces or overheating
The surface of the vacuum pump can reach operating tempera -
tures > 70 °C , in particular when pumping heated media.
>
Avoid direct contact with the surface.
>
Use protection against accidental contact if the surface tem -
perature is regularly elevated.
>
Allow the vacuum pump to cool down before performing main -
tenance work.
The vacuum pump can be damaged due to overheating. Possi -
ble causes include insufficient air supply to the fan and failure to
maintain minimum distances.
>
When installing the device, ensure that there is a minimum
distance of 5 cm between the cooling fan and adjacent parts
(such as the housing, walls, etc.).
>
Always ensure sufficient air supply; if applicable, provide
external forced ventilation.
>
Place the device on a stable surface; a soft surface such as
foam rubber as a sound absorber can impair and block the air
supply.
>
Clean polluted ventilation slots.
>
Remove covers from the device before operating it.
>
Avoid excessive heat input due to hot process gases.
>
Observe the maximum admissible media temperature

see chapter: 8.1.1 Technical data on page 78 .
Surface tempera-
tures
Overheating