vacuubrand PC 510 select Instructions For Use Manual Download Page 13

Page: 13 / 92

20901101_EN_PC5xx-6xx_select_Serie_V1.3_260819

Safety information

2 Safety information

The complete information of this chapter must be observed by all

persons working with the described product herein.

The safety instructions are valid for the complete life cycle of the

product.

2.1 Usage

Only use the product if it is in perfect working condition.

2.1.1 Intended use

A chemistry pumping unit of the

PC 500/600 select

product series

is a vacuum system consisting of a vacuum pump, controller, sen

sor and separator, for the creation and control of rough vacuum

in designated systems, e.g., evacuating distillation instruments, as

a vacuum dryer or systems with VACUU·LAN local area vacuum

network, etc.
A chemistry pumping unit of type

PC 520

PC 620 select

is fur-

thermore designed for parallel electronic vacuum control.
Attached chillers (vapor condenser), including separators and

flasks, are exclusively intended for vapor condensation.

The vacuum system may only be used indoors in a non-explosive

atmosphere, and in a dry environment.

Intended use also includes:

observing the information in the document

Safety information for

vacuum equipment

observing the manual,

observing the manual of connected components,

observing the inspection and maintenance intervals and having

it performed by appropriately qualified personnel.

using only approved accessories or spare parts.

Any other use is considered improper use.

Intended use

Summary of Contents for PC 510 select





























































































Search results

Summary of Contents for PC 510 select

Reviews:

Related manuals for PC 510 select

Brands by name

Popular brands

vacuubrand PC 510 select, Instructions For Use Manual

Search results

Summary of Contents for PC 510 select

Reviews:

Related manuals for PC 510 select

Brands by name

Popular brands