manualshive.com logo in svg

vacuubrand MD 12C NT VARIO o.C., Instructions For Use Manual

Share
Download
vacuubrand MD 12C NT VARIO o.C. Instructions For Use Manual Download Page 28

28

20901544_E12C+16C_NT Vsel_V1.2_260922

Installation and connection

Check installation 

conditions 

 

>

Please note that a 

dia-

phragm pump can weigh 

approx. 29 kg

. We recom‑

mend using a lifting aid.

 

>

Lift the unit out of the pack

‑

aging by the side handles.

4.2  

4.2  Installation

Installation

NOTE

NOTE

Condensate can damage the electronics.

A large temperature difference between the storage location 

and the installation location can cause condensation.

 

>

After goods receipt or storage, allow your vacuum device to 

acclimatize for at least 3‑4 hours before initial use.

Check installation conditions

 

ƒ

The device is acclimatized.

 

ƒ

Ambient conditions have been observed and are within the limi‑

tation of use.

 

ƒ

The pump must have a stable and secure base without addi

‑

tional mechanical contact apart from the pump feet.

 Example

Lift out the 

diaphragm pump 

(shown with 

vapor condenser 

accessory) 

Summary of Contents for MD 12C NT VARIO o.C.





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands