INVERTER CONTROL KEYPAD
vacon • 69
24-hour s358 (0)201 212 575 • Email: [email protected]
9
9.2
State leds
State LEDs light up according to state indicators READY, RUN and FAULT of the inverter. If all LEDs
blink the drive is uncommissioned.
9.3
Text lines
The three text lines (
•
,
••
,
•••
)provide the user with information about the current location within the
menu structure of the panel, separate from information related to the operation of the unit.
9.4
Panel push buttons
The alphanumeric control panel of the inverter VACON 8000 SOLAR has 9 push buttons used to
control the inverter and to monitor values.
9.4.1
Description of push buttons
= Lights up with DC voltage connected to the converter with no active failure. The
state indicator READY also lights up simultaneously.
= Lights up when the converter is running.
= Blinks when there are unsafe running conditions and the unit has therefore
stopped (fault trip). Simultaneously, the state indicator FAULT blinks in the dis-
play and shows a description of the fault; see chapter Active Faults.
•
= Indication of the place in the panel; it shows the menu symbol and number,
parameter, etc.
Example: M1 = Menu 1 (Display); P1.3 = Generated power
••
= Description line; Shows the description of the menu, value or fault.
•••
= Value line; it shows numeric values and reference texts, parameters, etc, as
well as the number of submenus available for each menu.
=
This push button is used to reset active faults.
=
This push button is used to switch between the two last displays.
reset
selec t
