9
vacon • 70
INVERTER CONTROL KEYPAD
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
9.5
Browsing the control panel
Data on the control panel is arranged in menus and submenus. Menus are used, for example, to
display control signals and the measurements of reference values and faults shown.
The first menu level has menus from M1 to M7 and it is called
Main menu
. The user can browse the
main menu using the Browse push buttons up and down. The chosen submenu can be accessed
from the main menu using the Menu push buttons. When there are pages under the menu or page
shown, you will see an arrow ( ) in the bottom right corner of the display and you will be able to
access
the following menu level by pressing the
Push button Menu right
.
9.5.1
Monitoring menu
To enter the Monitoring menu from the Main menu, press the Push button Menu right when the location
indication
M1
appears in the first line of the screen. The following figure shows how to view
the monitored values.
The monitored signals have the indication
V
#.#
and are listed in the following table. Values are updated
every 0.3 seconds.
=
The Enter push button serves to:
Restore the fault history (2-3 seconds)
= Push button browser up
Browse the main menu and the pages of different submenus.
= Push button browser down
Browse the main menu and the pages of different submenus.
= Push button Menu left
Return to the menu.
= Push button Menu right
Go forward in the menu.
= To start-up the inverter
In a Multi-Master system: Enable inverter
= To stop the inverter
In a Multi-Master system: Disable inverter
enter
+
-
3
4
start
stop
V1
Î
V14
READY
Local
RUN
Monitor
Location
Desc ription
Number of available eleme nts;
eleme nt value
