Vacon 8000 solar, User Manual

Page: 32 / 84

5
vacon • 31 ELECTRICAL CONNECTION
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Terminal Parameter reference
on keypad and NCDrive
Technical information
1 +10 Vref Reference 10V; Maximum current 10 mA
2 AI1+ An.IN:A.1 Selection V or mA with jumper block X1 (see page 30):
Default: 0– +10V (Ri = 200 k
Ω
)
(-10V..+10V Joy-stick control, selected with ajumper)
0– 20mA (Ri = 250 ? )
Resolution 0.1%; Accuracy ±1%
3 AI1– Differential input if not connected to ground;
Allows
±
20V differential mode voltage to GND
3 AI1–
4 AI2+ An.IN:A.2 Selection V or mA with jumper block X2 (see page 30):
Default: 0– 20mA (Ri = 250
Ω
)
0– +10V (Ri = 200 k
Ω
)
(-10V..+10V Joy-stick control, selected with a jumper)
Resolution: 0.1%; Accuracy
±
1%
5 AI2– Differential input if not connected to ground;
Allows
±
20V differential mode voltage to GND
5 AI2–
6 24 Vout (bidirec-
tional) 24V auxiliary voltage output. Short-circuit protected.
±
5%, maximum current 150 mA
+24Vdc external supply may be connected.
Galvanically connected to terminal
#
12.
7 GND Ground for reference and controls
Galvanically connected to terminals #13,19.
8 DIN1 DigIN:A.1 Digital input
1 (
common
CMA); R
i
=
min
. 5
Ω
9 DIN2 DigIN:A.2 Digital input
2 (
common
CMA); R
i
=
min
. 5
Ω
10 DIN3 DigIN:A.3 Digital input
3 (
common
CMA); R
i
=
min
. 5 Ω
11 CMA Digital input common A for DIN1, DIN2 and DIN3.
Connection by default to GND.
Selection with jumper block X3 (see page 30):
12 24 Vout (bidirec-
tional) Same as terminal
#
6
Galvanically connected to terminal
#
6.
13 GND Same as terminal
#
7
Galvanically connected to terminals
#
7 and 19
14 DIN4 DigIN:A.4 Digital input
4 (
common
CMB); R
i
=
min
. 5
Ω
15 DIN5 DigIN:A.5 Digital input
5 (
common
CMB); R
i
=
min
. 5
Ω
16 DIN6 DigIN:A.6 Digital input
6 (
common
CMB); R
i
=
min
. 5 Ω
17 CMB Digital input common B for DIN4, DIN5 and DIN6.
Connection by default to GND.
Selection with jumper block X3 (see page 30):
18 AO1+ AnOUT:A.1 Analogue output
19 AO1– Output signal range:
Current
0(4)–20mA, R
L
max 500
Ω
or
Voltage
0—10V, R
L
>1k
Ω
Selection with jumper block X6 (see page 30): Maximum
Resolution: 0.1% (10 bits); Accuracy
±
2%
20 DO1 DigOUT:A.1 Open collector output
Maximum
U
in
= 48VDC
Maximum current = 50 mA
Table 13. I/O terminals on OPTA1 (coded terminals painted black)