Safety precautions
5
1.3
Appliance-specific safety
precautions
Children aged 3 to 8 years are
allowed to load and unload
refrigerating appliances.
1.4
Installing the appliance
The appliance must be installed by
qualified persons.
Each stage of the installation process
must be performed and checked in full
and in the order specified.
Electrical connections must be carried
out by qualified personnel in accordance
with the guidelines and standards for
low-voltage installations and the
specifications of the local electricity
supply companies.
A plug-in appliance may only be connected
to a socket outlet with an earthing contact,
installed according to specifications. An
all-pole mains isolating device with a 3 mm
contact opening should be provided in the
domestic wiring system. Switches, plug
and socket devices, circuit breakers and
fusible cut-outs that are accessible after
installation and have all-pole switching are
permissible as isolating devices. Effective
earthing and separately installed neutral
and
earth conductors ensure safe and
fault-free operation. After installation, live
parts and cables with basic insulation must
not be accessible. Check old installations.
Refer to the identification plate for
information on the required mains
voltage, current type and fuse protection.
All plastering, plasterboarding,
wallpapering or painting work must be
carried out prior to installing the
appliance.
Efficient repairs can only be guaranteed
if it is possible to uninstall the complete
appliance at any time without causing
any damage.
The appliance is very heavy: please bear
this in mind when moving it.
Never stand on the base, drawers, doors,
etc. or use them as supports.
The ice and water dispenser requires a
connection to the domestic water supply.
Use the water inlet hose supplied to
establish this connection. The water
pressure must be between 207 kPa and
689 kPa (between 2.07 bar and
6.89 bar). Other operating pressure
values can result in operating faults or
leaks in the hydraulic circuit.
Before switching on the ice and water
dispenser for the first time, make sure
the water filter insert is installed and the
water circuit has been flushed through as
described in the installation instructions
(see Page 8 onwards).
The appliance must only be supplied with
potable water. Always establish the water
connection before the electricity
connection.
1.5
Instructions for use
Before using for the first time
The appliance must be installed and
connected to the electricity supply in
accordance with the
installation
instructions
(see Page 8 onwards).
Have a qualified fitter/electrician carry
out the necessary work.
Electrical safety (protection against
contact) must be ensured by the
installation.
If the appliance is visibly damaged,
do not use it. Contact our Customer
Services. Do not use the appliance
if the cold circuit is damaged.
