Installation
11
Determine the distance between the filter and the tap, and the distance between the filter
and the appliance. Prepare the lines as necessary by
cutting to length the ones you want to connect to the
filter inlet or outlet.
Mount the filter holder on the wall using a
screwdriver and attach the filter.
1
Filter holder
2
Outlet
3
Filter
4
Inlet
The filter must be kept upright as shown in the
diagram above. It is important to connect the water inlet and drain hoses to the
filter correctly. Do not mount the filter on the appliance, as this could pierce the
refrigerant lines.
Risk of damage to the appliance.
Connecting the water lines to the filter
To connect the water lines to the filter, follow the installation steps below:
Remove the two clips and then pull out the
two stoppers in the water filter.
1
Clips
2
Stoppers
3
Water filter
Insert the water lines fully in the inlet and
outlet of the water filter.
1
Water line
2
Inlet
3
Water filter
4
Outlet
Insert the two clips in the right position and
check that they are holding the water line in
place.
1
Clips
2
Water line
3
Direction of water flow
