Installation instructions
Heat pump dryer
One-family household
1014097-R05
07/11/2017
1014097-R05
5
2.
Installation
3
▸
Turn over the installation plate
3
. Push to the front edge of the
washing machine cover plate (see arrow) and adhere into place.
Tumble dryer
Models 12004, 12005, 12006
Washing machine
Models L (265, 11001, 11010), S (266, 11002, 11011), SL (268, 11003, 11012), SLQ (269, 11006,
11013) and SLQ WP (11004, 11014)
1
2
▸
Take the tower panel
1
out of its fixture
2
on the back of the
tumble dryer.
3
1
▸
Install the tower panel
1
on the mounted installation plate
3
.
2. Inserting the ventilation grille
The heat given off from the rear of the appliance must be conducted out of the niche.
≥
50
400 cm²
Ventilation grille
≥1710
Nic
he height
400 cm²
Ventilation grille
≥860
Nic
he height
▸
Insert 2 ventilation grilles P33002 or a ventilation cross-section
of min. 400 cm
2
.
▸
Ensure there is a supply of fresh air via the connection opening.
The condensed water hose must not be crushed between the rear of the appliance and the building wall.
