Installation instructions
Heat pump dryer
One-family household
1014097-R05
07/11/2017
1014097-R05
6
3. Levelling
To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the installation plate and not
wobble.
L
▸
Roughly adjust the height of the front and rear adjuster feet.
▸
Use a spirit level
L
to level the appliance.
▸
Slide the appliance onto the installation plate.
▸
Finely adjust the front adjuster feet.
–
The appliance must not wobble!
4. Electrical connections
Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards
for low-voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Check old installa-
tions.
▸
The appliance is designed for use up to a max. altitude of 2000 m above sea level.
▸
Refer to the identification plate for information on the required mains voltage, current type and fuse protection.
If the appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable out-
let device should be positioned so it is not subject to splashing or ingress of moisture.
The mains plug must not be cut off.
Connection cable
Valid for all washing machines and tumble dryers in the Adora model range.
The mains cable may only be replaced by the manufacturer, its Customer Services or a similarly qualified person.
Error messages «U1»
Disconnect the appliance from the mains and control the wiring.
