9 Trouble-shooting
... in the display appears
Inlet water very cold
heating extended
Possible cause
Solution
•
Inlet water very cold. Heat-
ing is extended.
... in the display appears
Too many articles
heating extended
Possible cause
Solution
•
Selected programme is in-
tended for a reduced
washing load. If there are
too many articles, heating
and possibly also the rins-
ing will be extended.
With the next wash cycle adjust the amount of
articles to the max. washing load (see 'Pro-
gramme overview').
… the washing is not spinning or is not being spun properly
Possible cause
Solution
•
The spin speed set is too
low.
►
Increase the spin speed for the next wash
cycle.
•
Too unbalanced a load in
the washing drum. The
wash items cannot be
more evenly distributed.
►
Wash large and small items together to re-
duce the possibility of unbalanced loads
forming.
•
Steam anti-crease was se-
lected and the appliance
was not standing level.
►
Optimize the appliance set-up according to
the installation instructions.
59
