V-ZUG 288400 Operating Instructions Manual Download Page 70

Page: 70 / 84

10 Washing tips

Fabric stains

Possible cause

Solution

•

Rust stains.

•

Chemical effect.

►

Brush out work overall pockets.

►

Residues from hair care products, cosmet-
ics and plants can react with the suds to
cause a chemical reaction that can result in
staining.

►

Wash items with metal parts separately.

Holes, rips or tears

Possible cause

Solution

•

Washing items with zips
or hooks (e.g. bras) open.

►

Fasten zip fasteners and hooks before
washing.

►

Wash delicates in a laundry bag or pillow
case.

►

Turn garment pockets inside out.

•

Chemical effect of wash-
ing detergent.

•

Fabric quality, wear and
tear, weathering of fibres.

►

Do not put washing detergent directly on to
fabrics.

•

Washing drum damaged
by foreign objects (e.g.
nails, paper clips, bra
hooks).

►

Inspect the washing drum for foreign ob-
jects and for damage.

►

Remove foreign objects.

►

Call Customer Services if the washing drum
is damaged.

Summary of Contents for 288400





















































































Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands

V-ZUG 288400, Operating Instructions Manual

Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands