5 Programme overview
5.4
Additional functions
Function/Symbol
Uses
Temperature setting
The temperature can be changed in steps of 10 °C
or 15 °C, allowing slightly soiled (not stained) tex-
tiles to be washed with a saving in energy.
Cold wash:
Not heated
Spin speed
The spin speed can be changed in steps of 200
rpm (1200, 1000, 800, 600, 400 rpm, stop after
rinsing, 1600,1400 rpm). Delicates can thus be
spun at a low spin speed. However, this increases
the drying time (greater energy consumption for
tumble drying).
Delayed start
Take advantage of cheap-rate electricity (setting
range of up to 24 hours). When the time set is
reached, the programme starts automatically.
Fast forward /
End of programme
Press the
button to skip individual parts of a
programme at any time during the programme se-
quence.
Pause / Door opener*
Pressing the
button 1× when a programme is
running will cause the programme to pause. Press-
ing the
button again will cause the appliance
door to open provided the appliance is in a state
that allows this action (depends on the water level,
temperature, speed).
Press the flashing main programme button to end
the pause and resume the programme.
* Depending on the serial number (FN)
25
