V-ZUG 288400 Operating Instructions Manual Download Page 69

Page: 69 / 84

10 Washing tips

Unsatisfactory wash result using liquid detergent

Possible cause

Solution

•

Liquid detergent used
does not contain bleach.
Fruit, coffee and tea stains
cannot be removed.

►

Use washing detergent containing bleach.

Soap deposits on washing

Possible cause

Solution

•

Water too hard.

►

Only use soap detergent if the water hard-
ness does not exceed 25 °fH.

Colour run

Possible cause

Solution

•

Non-fast colours in the
wash.

►

Wash white and coloured textiles separ-
ately.

►

Follow the fabric care instructions on the
items of washing.

•

Objects in the wash
whose colour has run.

►

Empty garment pockets.

Rinsing performance

Possible cause

Solution

•

Too much washing deter-
gent.

►

Adjust washing detergent dosage to water
hardness and degree of soiling.

•

Very «soft» water (below
15 °fH).

►

Use the additional

function.

Summary of Contents for 288400





















































































Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands

V-ZUG 288400, Operating Instructions Manual

Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands