V-ZUG 288400 Operating Instructions Manual Download Page 60

Page: 60 / 84

9 Trouble-shooting

... in the display appears

Large unbalanced load
spin extended

Possible cause

Solution

•

Large unbalance in the
washing drum. The appli-
ance tries to improve the
distribution of the wash
load. The final spin is ex-
tended.

►

Wash large and small items together to re-
duce the possibility of unbalanced loads
forming.

… vibrating heavily when spinning

Possible cause

Solution

•

The transportation lock
has not been removed.

►

Remove transportation lock.

•

The feet of the appliance
are not properly adjusted.

►

Optimize the appliance set-up according to
the installation instructions.

•

The load could not be op-
timally balanced in the
washing drum. This is not
a malfunction.

►

Wash large and small items together to re-
duce the possibility of unbalanced loads
forming.

… at the end of the programme, the appliance door cannot be opened by
pressing the door opener button

Possible cause

Solution

•

The appliance door is
stuck.

►

Press hard against the lock side of the appli-
ance door (i.e. front edge of appliance door).

►

Some text appears in the plain text display.

►

Press the

button.

•

An interruption in the
power supply.

►

Use emergency door release.

Summary of Contents for 288400





















































































Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands

V-ZUG 288400, Operating Instructions Manual

Search results

Summary of Contents for 288400

Reviews:

Related manuals for 288400

Brands by name

Popular brands