7
Battery Power Indication Lamp
The battery power indication lamp will light only if the cleaner power is turned on.
When not in use, always turn off the power switch on the cleaner.
Power indication lamp color
Power indication
Green
Red flashing
Green flashing
Red
Sufficient
Battery low, requiring recharging
During recharging
Abnormal / lifting up
CONTROL PANEL
IR receiver
Power indication lamp
Short working time
indication lamp (green)
Middle working time
indication lamp (yellow)
Max Long working time
indication lamp (red)
MOP (green)
Selection button
1. Power Switch, the green indication lamp lights
.
4. When you press VAC (on/off) button on remote control the MOP indicator will light
on and the vacuum motor and sweep motor will stop to allow mopping to proceed
without suction or sweeping.
5
when it is on
2. The selection button is for setting the working time. Press it to shift the indication
lamp to " Max " position (stays in red) <working until the battery is exhausted>, to
" M " position (stays in yellow) <working 40 minutes>, and to " S " position (stays in
green) <about 20 minutes>.
3. From the fourth time to the sixth time you press the selection button, the indication
lamp will be shifted to " Max " position (flashing red) <exhausted>, to " M " position
(flashing yellow) <about 40 minutes>, and to " S " position (flashing green) <about
20 minutes>. The flashing indication lamp means: After the mission is completed,
the unit will not go back to the docking station for charging.
. When the battery runs out of power, the red indication lamp will flash (see battery
power indication lamp).
