15
INSTALLING THE DOCKING STATION
Fig. 9
Fig. 10
SPIRAL
AUT
O
ST
OP
RIGHT
LEFT
FOR
W
ARD
VA
C
ON/OFF
BACK
DOCKING
Power switch
Selection switch
Power switch on
Keep pressing
Press " Docking "
Consumers can test if the docking station is installed well or not by the following two
methods, if the vacuum cannot go back to the docking station and charge successfully,
then please replace the docking station to the proper height.
1. Test by the main unit: Keep pressing the selection button and switch on the power
of the vacuum. After the unit begins moving, release the selection button and the
unit will directly switch to the mode of automatically finding the Docking Station for
charging. Please refer Fig.9.
2. Test by the remote control: Switch on the vacuum, press the button "Docking" on the
remote control, the vacuum will go back to the docking station for recharging.
Please refer Fig.10.
Testing
