11
Fig. 3
Power indication lamp
Adaptor plug
(d.c. 24V 500mA)
d.c. jack
RECHARGING BATTERY
1. It takes 6-8 hours to fully charge the battery.
2. If the power indication lamp on the control panel is flashing red, it indicates that the
battery needs recharging immediately.
3. Make sure the cleaner is switched off and the battery is properly mounted.
4. Plug the d.c. end of the adaptor into d.c. jack at the side of the cleaner first, and
then plug the a.c. end of the adaptor into the a.c. power outlet on the wall.
(Please connent the adaptor to the unit first before connecting to the a.c. power
outlet.) Please refer Fig.3.
5. The power indication lamp on the control panel will flash green.
6. The power indication lamp stays green when the battery is fully recharged.
ATTENTION!!!
Recharges the battery without discharging it may cause the
battery malfunctioned.
1. After the battery is fully charge, it should be discharged before recharge.
Discharge: Let unit operate for 20 minutes at least, such operation will discharge
the battery enough for recharge.
2.Recharges the battery more than 3 times without discharging it may cause the
battery malfunctioned. Under such condition, please stop the charging process
and put the unit away from docking station, with its power on for an hour at least,
then re-start the unit.
*
