16
INSTALLING THE DOCKING STATION
1. When the unit has finished cleaning, it will begin searching for the docking station
to begin charging. If the unit cannot locate the docking station and charge
successfully after the power is exhausted, you should manually put the unit back to
the station for charging. Normally the power indication lamp will flash green when
the unit is being charged. But if the power indication lamp doesn't go on, it means
that the unit is exhausted of power and you should charge the unit manually: Switch
off the power and plug the DC adaptor into the unit to do the charging. At this time
the power indication lamp will flash green. No matter if the unit is charged manually
with the adaptor or at the docking station, when the unit is fully charged, the power
indication lamp would stay green.
2. You should switch off power of the unit when you want to charge the unit by your self.
Also you can manually charge the unit for about 5~10 minutes, and then put the unit
back to the docking station to be charged automatically. And there will be two
circumstances for automatic charging:
(1)UNIT POWER SWITCH OFF: No matter what working time mode you've set in the
vacuum, it will not go and clean even when it is fully charged.
(2)UNIT POWER SWITCH ON: When the time of cleaning is up, the unit starts to
clean in mode " Max " After completing the work, the unit would find its way back to
the station and do the charging. And at the next time it starts cleaning, it will also
work in mode " Max ".
3. If you don't want to have the unit do the automatic charging, you could press the
selection button on cleaner (or press the "AUTO" button on the remote control)
until the indication lamp of "MAX", "M" or "S" is blinking.
4.
Starting Operation
When the unit is in docking station for recharge, but the unit has no green light flashing,
it means the battery has no power at all. If this happens, please take the unit out of
docking station and turn the power off and plug the DC inlet directly to the unit for
recharge.
