V.Bot RV-14, Operation Manual

Page: 9 / 24

Full Go
Set Select
+
-
CLK
SET Su We Tu Mo Th Fr
GO
Sa
1
2 3 4 5
8
Minute Hour Day of Week
Completed setting
for time of cleaning
Present Time Setting
Start
CONTROL PANEL OF DOCKING STATION
Battery Indicator
Starting Operation
Setting Present Time
Setting the time of Cleaning
2. The LCD display will be flashing in the time area.
3. Press Button (1)"Full Go" once, then the start indication "GO" will show at the
underneath right side which means that when the unit is fully charged, it will
automatically start cleaning. The second time you press the button, the start
"GO" indication will vanish and the function is cancelled.
4. Press Button (2)"Set" to switch between the present time and the time of cleaning.
1. Press Button (2) "Set" once, "SET CLK" will flash and you can start setting the time
of day.
2. You can press Button 3 "Select" to switch among the three time setting modes of
Hours, Minutes, and Week. Press button (2) to set each area when completed
and continue onto the next area to set.
3. Press Button (4) (+) and Button (5) (-) to adjust the digits up or down.
1. Press Button (2) "SET" twice, "SET " will flash and you can start the time of
cleaning.
2. Press Button (3)"Select" to switch among the three time setting models of "Hour" /
"Minutes" / "Week" to do the setting. If there's no time setting been done before,
the screen will show -- : --, you just have to press Button (4) and (5) to adjust the
digits up or down.
3. You can do the setting to do the cleaning everyday (Su-Sa) or five days a week
(Mo-Fr) or six days a week (Mo-Sa) or two days a week (Su and Sa) or any
individual day of the week.
4. Press Button (4) (+) or Button (5) (-) to adjust the digits up or down.
5. After completing the cleaning time setting, the "
" will show on the left side of
the LCD display.
* When the unit is successfully charged at the docking station, the battery indicator
on LCD display on the docking station will flash, indicating the unit is under charging.
1. Connect the adaptor to the docking station and then plug the adaptor into the wall outlet.