27
Operating instructions VisionLine
27
4�3�1 Changing the special glass pane
The special glass panes of our cameras are extremely robust and designed for continuous operation
under the influence of cooling lubricantslant and metal chips.
Nevertheless, the special glass pane is a spare or wear part on all models. The, permanent operation
of cooling lubricants and metal chip bombardmentwhich can lead to deposits, scratches or other
defects. The glas pane of all models can be changed in a few easy steps.
Pane change VisionLine RWC
1. Clamping Screw
2. Special glass pane
3. Camera housing RWC
Loosen the clamping screw (pos. 1). To do this, fix the pane (pos. 2) in place with the aid of a
face spanner over the two holes in the outer ring. Then pull the pane forward from the mount and
place the new pane on top. Tighten the new pane in the same way as you removed the old pane.
