15
Operating instructions VisionLine
15
Mounting of the control box via the cable-hose-package:
At the chosen position a Ø30mm hole is needed in the machine wall. This should preferably be done
with a step drill or a sheet metal punch.
Carry the wall mount (no. 1) with the attached flat seal (no. 4) from the interior of the machine
through the hole. On the outside of the machine, the control box (no. 7) must now be placed on the
wall mount (no. 1) and tightened with a washer (no. 5) and the nut (no. 2).
The control box must be aligned with the connections in such a way that the hose and cable are
optimally routed.
The hose connector (no. 6) can now be screwed into the thread of the wall mounting (no. 1) in the
machine interior.
1. wall mount
2. nut M30x1,5
3. machine wall
4. flat seal
5. washer
6. hose connector
7. control box