background image

Hallett Instruction Manual 

Released on 8-Aug-19 

– GH2B

 

Page 47 

UV Pure Technologies Inc. © 2019

 

performed  with  original  equipment  UV  Pure  lamps.  NON-ORIGINAL 
EQUIPMENT  UV  LAMPS  have  not  been  approved  by  certifying  bodies, 
thereby invalidating those tests and certifications. If you have a question as to 
whether  UV  Pure  lamps  are  original  equipment,  please  call  our  Toll  Free 
Customer Service line at: 1-888-407-9997. 
 
 
UV  Pure  may  source  and  supply  equipment  that  is  manufactured  and 
warrantied  by  other  companies  (the  Original  Equipment  Manufacturer)  and 

offered  as  options

 

in  conjunction  with  UV  Pure’s  Products  and  Parts.  For 

example:  heaters  or  AC  units  used  in  NEMA  cabinets,  solenoid  shut-off 
valves,  stainless  flexible  hoses,  filter  housings  and  inserts,  UPS  power 
supplies,  and  on-line  instrumentation  or  web-enabling  communications 
equipment. 

Warranties 

for 

those 

components 

are 

solely 

the 

responsibility  of  the  Original  Equipment  Manufacturer,  and  NOT  UV 
Pure.

 UV Pure uses reasonable efforts to ensure that OEM options are of the 

highest quality possible and co

nsistent with UV Pure’s high standards. 

 

UV Pure is not responsible for Parts or Products that are improperly installed, 
used and/or not maintained as set out in the Product Manual or as expressly 
advised  by  UV Pure.  This  Limited Warranty  does  not cover  damage caused 
by accidents, acts of God, minor scratches or imperfections and normal wear 
and tear. This Limited Warranty is void if the Product is improperly installed, 
used  in  conditions  that  exceed  UV  Pure’s  specifications  as  set  out  in  the 
Manual or Product Specifications, or if there is water damage due to improper 
installation  or  poorly  or  improperly  tightened  plumbing  connections.  This 
Limited Warranty is void if the Product or Parts have been altered or modified 
in any way by anyone other than a UV Pure technician or a Certified Service 
Dealer.  Warranty  coverage  may  be  void  if  the  Product  is  operated  in 
combination with ancillary or peripheral equipment not approved by UV Pure 
for use with the Products. 
 
This  Limited  Warranty  excludes  the  cost  of  labour  in  removing  and/or 
reinstalling  any  defective  Product  or  Part.  In  the  event  that  a  Product  is 
returned to UV Pure for repair or replacement under the terms of this Limited 
Warranty, the Product must be returned in its original shipping container and 
packaging.  UV  Pure  will  not  be  liable  for  damage  to  the  Product  during 
shipping otherwise. 
 
UV Pure does not assume any liability for personal injury or property damage 
caused by the use or misuse of any Product or Part. UV Pure is not liable for 
special,  inci

dental,  indirect  or  consequential  damages.  UV  Pure’s  liability  is 

limited  to  repair  or  replacement  of  the  defective  Part  or  Product  and  this 
liability  shall  terminate  upon  the  expiration  of  the  applicable  warranty  period 
as set out above. 
 
This Limited War

ranty may be amended or changed at any time, at UV Pure’s 

sole discretion, without notice. 
 

UV Pure offers inspection and refurbishing for older systems. 
 

Summary of Contents for Crossfire Technology Hallett 1000NC





















































Reviews: