UV Pure Technologies Crossfire Technology Hallett 1000NC, Instruction Manual

Page: 20 / 52

Hallett Instruction Manual
Released on 8-Aug-19
– GH2B
Page 20 UV Pure Technologies Inc. © 2019
Unit Functions
Figure 5.1
The user interface consists of a color touchscreen and a single multi-color
LED. See Figure 5.1. The LED will always be illuminated when the UV unit is
plugged in and powered up. The touchscreen enters sleep mode after 10
minutes and requires the user to touch it to wake it up. The touchscreen will
change colors if any significant event occurs such as warnings or alarms. See
the section on
Navigating the Menus for a complete layout of the screens.
Indicating LED
Green Light
– an illuminated green light indicates the unit is treating normally.
A slow flashing green light means the UV lamps are not yet at full power or
the unit is in standby mode awaiting a remote start. A fast flashing green light
means the wiper is cycling.
Red Light
– an illuminated red light indicates either a warning or an alarm has
occurred. A warning is a condition that, if not addressed, could impact the
unit’s performance. Warnings should be addressed as soon as possible.
Warnings are accompanied with a flashing red LED, a single beep, a
message, and a yellow screen. An alarm is a condition that has significantly
impacted the
unit’s performance and it must be addressed immediately.
Alarms are accompanied with a solid red LED, continuous beeping, a
message, and a red screen.
Audio Alarm
The audio alarm or beeper, will alert the operator to any conditions out of the
ordinary. A single beep will sound if a warning occurs; continuous beeping
will sound if an alarm occurs. The audio alarm may be disabled temporarily or
permanently in the Settings Menu, item 2.3.
Settings
Contact Info
System Info
LED