UTStarcom WA3001, User Manual

Page: 208 / 252

Chapter 9 CLI Command Set 179
Tx Rate
Use this command to set TX rate used for AP to send unicast
frame. Auto means the AP will auto-select the TX Rate
according to self algorithm.
Syntax: tx rate < value >
Possible value:
value: 1, 2, 5.5, 11, 6,9,12,18,24,36,48,54M, auto
Default value: auto
Access level: 2
Explanation: Use this command to set TX rate
Wireless Mode
Use this command to set wireless card work mode: 11b, 11g,
108g or 11b/g
Syntax: wireless mode < value >
Possible value: value: 11b, 11g, 11b/g, 108g
Default value: 11b/g
Access level: 2