UTStarcom WA3001, User Manual

Page: 162 / 252

Chapter 9 CLI Command Set 133
Mode : local, remote, local-remote, remote-local
Default value: local-remote
Access level: 2
Dot1x Encryption-Mode
Use this command to set the authentication encryption mode for
each port.
Syntax: dot1x encryption-mode < port > {chap|pap}
no dot1x encryption-mode <port>
Possible value:
Port : lan, wlan1, wlan2
chap|pap : keyword
default value: pap
Access level: 2
Dot1x Initialize
Use this command to initialize an 802.1x’s user based on the
user ID.
Syntax: dot1x initialize < userid >