UTStarcom WA3001, User Manual

Page: 171 / 252

142 Chapter 9 CLI Command Set
Access level: 2
Interface
Use this command to access the interface CONFIG level of the
CLI.
Syntax: interface ethernet { lan | wan }
Possible value: lan : Enters the LAN interface,
wan : Enters the WAN interface.
Access level: 2
IP Default-Route
Use the ip default-route global configuration command to
define a default gateway (router) when IP routing is disabled.
Syntax: ip default-route < ip-address>
n o ip default-route
Possible value: ip-address: IP address of the router.
Default value: Disabled.
Access level: 2