UTStarcom WA3001, User Manual

Page: 201 / 252

172 Chapter 9 CLI Command Set
Explanation: Use this command to set lease for an IP address
that is assigned from the DHCP server.
Network
Use the network DHCP pool configuration command to
configure the subnet number and mask for a Dynamic Host
Configuration Protocol (DHCP) address pool on a DHCP Server.
To remove the subnet number and mask, use the no form of
this command.
Syntax: [no] network < network-number> < mask >
Possible value: network-number: The IP address of the DHCP
address pool
mask: The bit combination that renders which portion of the
address of the DHCP address pool referring to the network or
subnet and which part referring to the host.
Access level: 2
Explanation: Use this command to set/remove the network for
DHCP pool on a DHCP server.
Manual-Binding
Use this command to specify the IP address to a specific MAC
address for a manual binding to a Dynamic Host Configuration
Protocol (DHCP) client.