UTStarcom WA3001, User Manual

Page: 185 / 252

156 Chapter 9 CLI Command Set
no radius-authserver host {first | second | third}
Possible Value:
ip-address : IP address of the RADIUS
authentication server host.
Access level: 2
RADIUS-Authserver Info
Use this command to set the designated authentication server’s
parameter(s). Use the no form of this command to set the
designated authentication server’s parameter(s) as default
value(s).
Syntax: radius-authserver info {first | second | third} [auth-
port <port-number> ] [authentication-key <string> ] [timeout
<seconds > ] [dead-time <minutes> ] [retransmit <retries > ]
no radius-authserver info {first | second | third} [auth-port]
[authentication-key] [timeout] [dead-time] [retransmit]
Possible Value:
auth-port: 1-65535; default value: 1812
authentication-key < string > :string; default value: “”
timeout: 1-16 seconds; default value: 5 seconds
dead-time : 1-1440 minutes; default value: 5 minutes