UTStarcom WA3001, User Manual

Page: 156 / 252

Chapter 9 CLI Command Set 127
Syntax: kill <session-id>
Possible value: session-id: 0 - 4
Access level: 2
Reboot
Use this command to reboot the system.
Syntax: reboot
Access level: 2
Auto-config Enable/Disable
Use this command to enable or disable auto configuration.
Syntax: auto-config enable/disable
Access level: 2
Global Config Commands
AP-Mode
Use this command to select AP work mode.
Syntax: ap-mode {bridge|route}