UTStarcom PLS6800, User Manual

Page: 10 / 140

10 Getting Started
1.1 Getting to Know Your Device and Its Accessories
5 1
3
4
7
12
9
10 11 13
8
2
6
No. Item Function
1 MESSAGING Button
Press to access your messages.
2 Notification LED 1
This LED shows the following:
•
A blinking Blue light when the Bluetooth system is powered-up and ready to
transmit radio frequency signal.
•
A blinking Green light when Wi-Fi is enabled.
•
When both Bluetooth and Wi-Fi are enabled, their lights will blink alternately.
3 Earpiece
Listen to phone calls.
4 Notification LED 2
This LED shows the following:
•
A solid Amber light when the battery is charging; a solid Green light when the
buttery is fully charged.
•
A blinking Green light when the device is connected to CDMA network.
5 INTERNET EXPLORER Button
Press to open Internet Explorer Mobile.
6 Hardware Keyboard
This is a QWERTY-style keyboard just like the computer keyboard. Slide the touch-
screen panel to the left to reveal the keyboard.
7 Touch Screen
Tap the screen with the stylus to write, draw, or make a selection.
8 Left and Right SOFT KEYS
Press to execute the command shown on screen above the button.
9 TALK Button
Press to answer an incoming call or go to the phone dialer screen.
10 START Button
Press to open the Start menu.
11 NAVIGATION Control/ ENTER
Press this multi-directional control up, down, left, or right to move through menus and
program instructions; carry out the selection by pressing the center of this control.
12 OK Button
Press to confirm your data entries, or to exit the program in use.
13 END Button
Press to end a call or to return to the Today screen.